Injin Kera Electrode

Bayanin Sabis

Silindrical baturina'ura masana'antu electrodekayan aiki ne mai mahimmanci a cikin tsarin kera batirin lithium. Ana amfani da su da farko don aiwatar da rufaffiyar da busassun coils na takarda mai kyau da mara kyau ta hanyar jerin ingantattun hanyoyin sarrafa mashin ɗin (ciki har da matakai kamar buga naushi) cikin ci gaba da tsiri waɗanda suka dace da buƙatun taro na batura cylindrical. Maɗaukakin madaidaicin shafin kafa, tsagawa, cire ƙura, gluing, da sarrafawa mai hankali yana ba da ƙwaƙƙwaran tushe don samar da babban aiki, babban - dogaro da batir lithium cylindrical, shirya don iskar iska ko lamination na gaba. Ingancin sarrafawa (kamar sarrafa burr da daidaiton ƙima) yana tasiri kai tsaye amincin baturi da aiki.

Ayyukan kayan aiki

Ana amfani da wannan na'ura musamman don shafukan walda ta atomatik na lithium - ion baturi electrodes;
1.A shafin da lantarki suna welded, shafa m m a gaba da baya .
2. Wannan injin yana ɗaukar yanayin sarrafawa mai girma{1}}ƙarshen Panasonic PLC don gane sarrafa kansa na sauke coil ɗin tab, yankan, waldawar lantarki, gluing gaba da baya, da sakewa, tana ceton ma'aikata da yawa, yana rage yawan lalacewar ɗan adam ga lantarki yayin aikin samarwa, tare da ingantaccen walƙiya mai inganci, da kuma fahimtar gluing na sama da ƙasa;
3. Electrode waldi da tef aikace-aikace, shi za a iya ta atomatik reeled don amfani a cikin cikakken atomatik winding inji;
4. Wannan na'ura ce mai sarrafa kansa sosai a cikin samar da lantarki. Wannan kayan aiki, tare da ci gaba da jujjuyawar wutar lantarki da ci gaba da cirewar lantarki, sun ƙunshi samar da lantarki ta atomatik.
5. Wannan inji yana da cathode da anode babba da ƙananan m kaset, kuma tabbatacce tab m.
6.Duk wani lahani na lantarki yayin aikin wannan injin yana da aikin gaggawar ƙararrawa.

Kayan aiki masu alaƙa

Mixer

Injin iska

Injin Kalanda

Injin allurar Liquid

Injin Stacking

Injin Yanke Don Batir

Kayan aikisigogi na fasaha

Kayan aikiamfani muhalli

1. Girma: 2 040 (L) × 1 050 mm (W) × 1689 mm (H)

2. Nauyi: kusan 1100 KG.

3. Rashin wutar lantarki: AC220V, lokaci guda; Canjin wutar lantarki bai wuce ± 10% ba; ikon: 5kVA.

4. Matsakaicin iska: 0.4-0.7Mpa (4-7kgf / cm²), ƙimar kowane iska mai ƙarfi shine 180L / min, kuma ƙimar amfani shine 50%.

5. Yanayin zafin jiki: 20-35 digiri.

6. Dangantakar zafi: 5-55% HR.

7. Tsaftar muhalli: bai gaza ajin 100,000 ba, ba tare da iskar gas, ruwa ko fashewar gas a wurin ba.

Kayan abubayani dalla-dalla da bukatun

1, Takaddun Material:

Bukatun kayan aiki

1. Baturi lantarki: m shafi baturi lantarki, lantarki aluminum tsare kauri 5 ~ 20um, lantarki shafi abin nadi latsa ci gaba da slitting cikin kayyade nisa, nisa kuskure ± 0.2mm, lantarki meandering kuskure kasa da ± 1.0mm / 1000mm, da kuma reled tare da 3-inch reel core, 0. jujjuya daidaito ± 1.0mm; shafi kuskure daidaito daidaito <± 0.5mm (shafi, slitting), shafin waldi blank nisa a kalla 2mm fadi fiye da shafin;
2. An liƙa tef ɗin manne tare da nisa na lantarki, kuskuren nisa na tef ɗin manne shine ± 0.2mm (kayan tef), kuma ba shi da sauƙin karya lokacin buɗe tef ɗin m;
3. Kuskuren nisa Tab: ± 0.1mm, kuskuren meander tab: 0.2mm/500mm (abun tab).
Bayanan kula:
(1) Ana walda ingantacciyar wutar lantarki a cikin dogon tsiri;
(2) Hanyar ganowa ita ce gwajin jinkiri;
( 3 ) Wannan kayan aiki yana ba da takamaiman sassa na samfurin karɓa kawai.

Saita manyan abubuwan da ke cikin kayan aiki

Abubuwan Aikace-aikace

Kamfanin Abokin Hulɗa