Tanderun Kayan Aikin Baturi

Bayanin Sabis

Tanderun dakin gwaje-gwaje na batir yana da mahimmancin kayan aiki na musamman wanda aka kera don masana'antar baturi na lithium, yana ba da dama daidai da gurɓatawa{0}free bushewar na'urorin lantarki, masu raba, da sel. Ta hanyar ƙirƙira ƙarancin ƙarancin yanayi{2}}danshi, iskar oxygen- kyauta, yana kawar da abubuwan kaushi yadda yakamata kuma yana hana oxidation yayin yin burodi{4}mahimmanci don haɓaka rayuwar baturi, aminci, da aiki.

Tanda na zamani don samar da baturi yana ba da cikakken aiki mai sarrafa kansa tare da tsarin zagayowar, taɓawa{0}}allon allo, da tsarin zafin jiki na PID don daidaito na musamman. Suna tabbatar da ɗumamar ɗaiɗaikun ɗaiɗaiku{2}, saurin haɓakar zafin jiki, da ingantattun matakan injina don biyan ƙaƙƙarfan buƙatun tsari. Maɓalli na yau da kullun sun haɗa da tsabtace nitrogen, shirye-shiryen bushewa da yawa{4}, da rufe kofa biyu{5}, da ƙaƙƙarfan kariyar yanayin zafi.

Gina tare da lalata{0}}mai jure bakin karfe na ciki da manyan bututun dumama wuta, waɗannan tanda suna ba da tabbacin dorewa da tsaftataccen aiki mai mahimmanci ga ƙwarewar kayan baturi. Makamashi -mai inganci kuma an tsara shi don sauƙin amfani, tanda injina na masana'antu yana da mahimmanci wajen samar da batura masu inganci{4}lithium{5}}, yana mai da su mahimman kadara ga masana'antun batir da masu binciken lab a duniya.

Kayan aiki ƙayyadaddun bayanai

1. Kimanin girma: tsawo 1780mm * nisa 1290mm * zurfin 1200mm;

2. Girman Studio: Φ600mm * 700mm * 2 ganga;

3. Manyan abubuwan kayan aiki:

1) Ana sarrafa kayan aiki ta hanyar na'urorin lantarki na gaske;

2) Hadakar tara;

3) Bakin karfe liner;

4) Bakin karfe dumama bututu;

5) 7-inch tabawa;

6) Ikon sarrafawa na shirye-shirye;

7) Cikakken mai sarrafa zafin jiki mai hankali ko tsarin kula da zafin jiki tare da sadarwar 485;

8) Vacuum baffle bawul;

9) An rufe kayan aikin tare da igiyoyin siliki na roba na siliki da gilashin kauri 12mm a matsayin ƙofar.

Bukatun fasaha na gabaɗaya

1. Yanayin aiki:

1) Matsayin samar da wutar lantarki: daidai da tsarin samar da wutar lantarki na kasar Sin daidaitaccen wutar lantarki 380V± 10% uku{3}}waya ta hudu{4}, da fatan za a yi ƙasa;

2) Yanayin zafin jiki: 5 digiri -45 digiri;

3) Dangi zafi: bai wuce 85% ba;

4) Tushen Tushen Gas: 0.35-0.5Mpa.

5) Busassun iskar gas: 0.1-0.2Mpa

6) Vacuum: -0.095 zuwa -0.1Mpa (a karkashin daidaitaccen yanayin yanayin yanayi)

2. Hattara:

1) Babu ƙarfi mai ƙarfi da motsin iska a kusa;

2) Babu iskar gas mai lalata;

3) Kada a toya abubuwa masu ƙonewa, iskar gas da abubuwan fashewa a cikin akwatin;

4) Dole ne mai amfani ya samar da wutar lantarki mai zaman kanta kuma ya kasance da alhakin samar da wutar lantarki a waje da kayan aiki.

3. Umarnin aiki na kayan aiki

1) Ta hanyar allon taɓawa, ana saita zafin zafi / lokacin tanda, vacuuming, cikewar nitrogen da sauran sigogi, kuma mai sarrafa hankali yana cika waɗannan ayyuka ta atomatik: vacuuming, dumama - cika da busasshiyar iskar gas - vacuuming - cikawa da busasshiyar iskar gas (maimaita zagayowar) - bayan an rage yawan zafin jiki, an rage yawan zafin jiki ta atomatik; akwai tsarin ƙararrawa sama da - zafin jiki da dumama bututun kariyar zafin jiki (hudu sama da{6}}kariyar yanayin zafi, wato kowane Layer na tanda yana da tsarin sarrafa zafin jiki guda biyu), wanda zai iya cire haɗin na'urar dumama ta atomatik, kuma madaidaicin zafin jiki na atomatik shine 40-100ºC.

2) ɗakunan aiki guda biyu suna aiki da kansu kuma suna zafi da kansu; saiti biyu na tsarin sarrafa zafin jiki (saiti ɗaya don sama da{1}}kariyar yanayin zafi da saiti ɗaya don tsarin sarrafa zafin jiki) na iya aiki da kansu ko a lokaci ɗaya. Hatimin injin yana da kyau. Ana iya fitar da kowane rami a fitar da iskar gas daban ba tare da tsoma baki da juna ba.

Jerin manyan abubuwan da aka gyara

Abubuwan Aikace-aikace

Kamfanin Abokin Hulɗa